XBMC Community Forum

Stopped Playing All Media All Of A Sudden

asanders — Sat, 21 Nov 2009 01:44:41 GMT

I have 2 XBOXs, both running XBMC. Today, one of them stopped playing all media, whether smb shares of videos and music, or internet streams such as Youtube and stuff on NaviX. I have not changed ANYTHING as far as network configuration or XBMC settings in the days leading up to the onset of this problem - it just seemed to start randomly.

Here's what I mean when I say XBMC has stopped playing media:

I can still see all of my media, whether it's files in an smb share or files on the internet. However, when I click on a file, the file will apparently begin to cache (for internet files the green cache progress bar will move from left to right, and for smb shares the green circle will appear in the upper right hand corner of the screen), but when it's ready to play the file nothing will happen and I'll remain on the same screen I started from. For smb shares, I will sometimes see a fraction of a second worth of video (basically a frame or two) before being kicked back to the screen I started from.

Here's what I've tried so far:

I re-added my SMB shares - no luck. I completely deleted and re-installed the latest build of XBMC - no luck. I reset my modem and reset and reconfigured my router - no luck.

Anyone have any sage advice?

Nokia Internet Tablet web remote

ShayneOSU — Sat, 21 Nov 2009 01:43:48 GMT

Hello, everybody. I've recently been working on an XBMC web front-end for Nokia Internet Tablets -- N770, N800, N810, and probably the N900. It should also work well on any other mobile device with an 800x480 screen with a capable-enough browser.

It is based on some great work from forum member jjchambers in this thread. All I did was switch out some graphics, change the CSS around a bit and ajax-ify it so the browser doesn't keep coming up on page loads. Oh, and I added a section to control the on-screen GUI. If you click the XBMC logo in the top-left corner, you'll see those controls.

It still needs work, but I'm probably not going to do much more on it because I just got a Mac Mini, and I'm using its little remote now. I thought I'd put this out there in case anyone else wanted to use it or do something with it. With a few tweaks, it could easily be adapted for 320x480 and be useful on a wider range of devices.

I can't post attachments, so I uploaded the file here:
http://www.megaupload.com/?d=99406R1N

Will XBMC work with Windows Media Center?

coolclayton — Sat, 21 Nov 2009 01:35:37 GMT

I am using Windows Media Center to record shows on tv and I have been contemplating making the XBMC settop box they put together on Lifehacker. If I use the settop box on my tv, can I watch the shows that I record on my computer using Windows Media Center?

[WINDOWS] Battery Indicator

typerextreme — Sat, 21 Nov 2009 01:01:49 GMT

I would love to see XBMC check the status of my battery for my laptop. This would be very great that way I wouldn't have to leave fullscreen mode.

More flow and life

Johan5556 — Sat, 21 Nov 2009 00:28:04 GMT

I am pretty sure XBMC don't have the power to do this for now. But shouldn't navigating the skin be more like this.

Some view are really rough and not very good but the flow and life. Really cool. I hope we will see this in XBMC soon.

http://www.youtube.com/watch?v=GbiP6...eature=related

http://www.youtube.com/watch?v=pBbFuzuavUE

/Johan

Possible to set custom aspect ratio for specific folder only?

berhack — Sat, 21 Nov 2009 00:17:47 GMT

Hi all,

I am using Camelot alpha 2 and it rocks. I wonder if it's possible to set custom AR for specific folder. Right now I have a folder of TV episodes that are in 4/3 but when played it's terribly blurry due to poor quality. Each time I play a new episode I gotta go to settings to adjust aspect ratio to smaller size. Any way to set it automatically just for that folder?

Thanks a lot....

Virtualkeyboard function gone?

SlaveUnit — Fri, 20 Nov 2009 23:12:03 GMT

I get the feeling Im going to get reamed for asking this. But did the virtualkeyboard function disappear in the advancedsettings.xml file? I still have the entry but the functionality is gone.

This is after updating from a build a few months old (pre camelot) to Camelot A2.

If I didnt search hard enough and the answer is right in front of me please ream me, I do it all the time. :)

[lircmap.xml] any way to invoke "scan for new content"?

Evanrich — Fri, 20 Nov 2009 22:40:31 GMT

I was going to put this under linux, since Lirc is linux, but seeing as how keymap keys are universal, thought I might get more hits here. I looked athttp://xbmc.org/wiki/?title=Keymap.xml but didn't see any options for invoking a scan for new content option. Let me be clear, I already have a remote button assigned to update my library, but I'd like to also have a key so that when I select a tv show, I can scan for just new content in that tv show. The option is available from the "C" menu, but not sure what window or option i have to call in Lircmap and remote.xml.

thanks

Looking to build an Atom/ION Nettop

Senor Valasco — Fri, 20 Nov 2009 21:56:33 GMT

For the last couple months I've been trying to decide what type of media player/streamer to get. At first I was looking at getting something like a Popcorn Hour...but then once I came across the ION Nettops, I started going in that direction. Since none of the pre-built nettops out there seem to have exactly what I want, and I also have some spare parts sitting around, now I'm looking at building one and installing XBMC.

I'll be using it mostly to play DVD/Blu-ray rips (via file server), but my feeling is also that internet streaming/download is the future of television/movie watching and I want to be prepared for that.

I will most likely be loading Windows 7 due to the Blu-ray disc playing capability. My thinking is I will put a Blu-ray player in my desktop PC and share the drive out.

So I'm looking at getting this motherboard/CPU:

ASUS AT3N7A-I Intel Atom 330 (1M Cache, 1.6GHz, Dual-Core) NVIDIA ION Motherboard/CPU Combo (http://www.newegg.com/Product/Produc...82E16813131408)

And the following case (none of the cases I've seen have really impressed me):
Winsis Wi-02 Black SGCC / ABS Mini-ITX Tower Computer Case 200W Power Supply (http://www.newegg.com/Product/Produc...82E16811234021)

In addition to that, I know I'll need memory, hard drive, etc, but I already have that stuff. I believe the only additional thing I'll need to buy is some type of IR Remote device to be able to use my Universal Remote to control it.

One concern I have - my TV is an older CRT Rear Projection model, so it doesn't have HDMI. I plan on getting an HDMI>Component transcoder, but obviously that won't give me audio. The motherboard I'm looking at has S/PDIF, but I've read that some of these motherboards don't do 5.1 (or 7.1) via S/PDIF, only via HDMI. That would be a problem for me. Is there any way to confirm if a motherboard's S/PDIF out does 5.1 & 7.1?

Any input is greatly appreciated!

Linux XBMC External Player: ExecuteAppLinux: Failure: -1

ksun6868 — Fri, 20 Nov 2009 21:19:19 GMT

Greetings,

I have read instructions and searched this forum but I could not make the external player(s) to work.

My system:

Quote:

Utuntu 9.10
GPU:Mesa DRI R300 (RV5157145)20090101 x86/m

My playercorefactory.xml looks like this.

Quote:

/usr/bin/totem
--fullscreen "{1}"
false
false
none
true

/usr/bin/rhythmbox
false
false
none
true

test.rmvb and test.mp3 work fine with totem and rhythmbox outside xbmc respectively.

Inside the xbmc, the default video player for test.rmvb is totem and the default music player is rythmbox. However, it failed when I actually click on them, they both failed with the NOTICE: ExecuteAppLinux: Failure: -1

Quote:

14:12:10 T:3078457200 M:1819381760 NOTICE: ExternalPlayer Filename: /usr/bin/totem
14:12:10 T:3078457200 M:1819381760 WARNING: ExternalPlayer: invalid value for warpcursor: none
14:12:10 T:3078457200 M:1819381760 NOTICE: ExternalPlayer Tweaks: hideconsole (false), hidexbmc (false), isla
uncher (false), warpcursor (none)
14:12:10 T:3078457200 M:1819381760 NOTICE: OpenFile: /root/Videos/test.rmvb
14:12:10 T:3078457200 M:1819381760 DEBUG: CGUIAudioManager::DeInitialize
14:12:10 T:2508176240 M:1819381760 DEBUG: thread start, auto delete: 0
14:12:10 T:2508176240 M:1819381760 NOTICE: Process: Player : /usr/bin/totem
14:12:10 T:2508176240 M:1819381760 NOTICE: Process: File : /root/Videos/test.rmvb
14:12:10 T:2508176240 M:1819381760 NOTICE: Process: Content:
14:12:10 T:2508176240 M:1819381760 NOTICE: Process: Args : --fullscreen "{1}"
14:12:10 T:2508176240 M:1819381760 NOTICE: Process: Start
14:12:10 T:2508176240 M:1819381760 NOTICE: ExecuteAppLinux: "/usr/bin/totem" --fullscreen "/root/Videos/test.rmvb"
14:12:10 T:2508176240 M:1819381760 INFO: LIRC setUsed: disabled
14:12:11 T:3078457200 M:1810812928 DEBUG: OnPlayBackStarted - Playback has started
14:12:11 T:2508176240 M:1819475968 INFO: LIRC setUsed: disabled
14:12:11 T:2508176240 M:1819475968 NOTICE: ExecuteAppLinux: Failure: -1
14:12:11 T:2508176240 M:1819475968 NOTICE: Process: Stop

Similar messages for the music piece.

Quote:

16:03:11 T:3078014832 M:1810333696 NOTICE: ExternalPlayer Filename: /usr/bin/rhythmbox
16:03:11 T:3078014832 M:1810333696 WARNING: ExternalPlayer: invalid value for warpcursor: none
16:03:11 T:3078014832 M:1810333696 NOTICE: ExternalPlayer Tweaks: hideconsole (false), hidexbmc (false), isla
uncher (false), warpcursor (none)
16:03:11 T:3078014832 M:1810333696 NOTICE: OpenFile: /root/Music/test.mp3
16:03:11 T:3078014832 M:1810333696 DEBUG: CGUIAudioManager::DeInitialize
16:03:11 T:2481974128 M:1810333696 DEBUG: thread start, auto delete: 0
16:03:11 T:2481974128 M:1810333696 NOTICE: Process: Player : /usr/bin/rhythmbox
16:03:11 T:2481974128 M:1810333696 NOTICE: Process: File : /root/Music/test.mp3
16:03:11 T:2481974128 M:1810333696 NOTICE: Process: Content:
16:03:11 T:2481974128 M:1810333696 NOTICE: Process: Args :
16:03:11 T:2481974128 M:1810333696 NOTICE: Process: Start
16:03:11 T:2481974128 M:1810333696 NOTICE: ExecuteAppLinux: "/usr/bin/rhythmbox" "/root/Music/test.mp3"
16:03:11 T:2481974128 M:1810333696 INFO: LIRC setUsed: disabled
16:03:12 T:2481974128 M:1810075648 INFO: LIRC setUsed: disabled
16:03:12 T:2481974128 M:1810075648 NOTICE: ExecuteAppLinux: Failure: -1
16:03:12 T:2481974128 M:1810075648 NOTICE: Process: Stop

Both players work fine outside XBMC, and

Code:

ExecuteAppLinux: "/usr/bin/totem" --fullscreen "/root/Videos/test.rmvb"

ExecuteAppLinux: "/usr/bin/rhythmbox"  "/root/Music/test.mp3"

seems to be the right syntax on Linux, something must be wrong interfacing XBMC with Linux OS.

Any help is appreciated.

Sincerely,

Kang Sun
ksun6868@gmail.com

Can't play .MPG movies on XBMC running on Apple TV

fschaeffer — Fri, 20 Nov 2009 21:01:02 GMT

Have just imported several .MPG movies from my Sony HD camcorder into my NAS.

In this NAS, I have a share folder and 2 sub-folders, named Movies (movies downloaded from the Internet and are mainly .AVI) and this newly created Camcorder Movies (which are all .MPG)

In XBMC, I created a new source by pointing to this newly created subfolder. The other Movies subfolder I have been using to watch movies without any problems for months now.

When I browse this Camcorder Movies subfolder on my iMac, I see all 154 MPG movies and I can watch then with VLC - If I try to watch them with Quicktime player, it won't play.

But on XBMC, when I select this source, it brings only one file named M2u.mpg which is not even seen on my iMac and when I try to exit using the Menu button on the remote, XBMC returns an error message with status 11.

Any clues?

Player display in windowed mode

chiron — Fri, 20 Nov 2009 20:12:27 GMT

Good afternoon from France, :)

I do use XBMC with Karmic Koala in windowed mode (not full screen) with a PC.

As far as I know, XBMC is the only upnp client player that works properly in linux (totem with dlna/upnp coherence plugin does not have fast forward feature when playing a video)

Well, my problem is that when i do play a video the "control panel" (not sure of the name: this thing with play/pause/fast forward, etc..) appears whenever i do move the mouse, inside the window or outside. Is it possible to change this behavior or to have a more classical control panel at the bottom of the window?

Thanks.

How to "auto download" subtitles?

mac666 — Fri, 20 Nov 2009 19:48:45 GMT

Hey

I have a python program, called periscope i think, that can download subtitles just by right clicking on the file in nautilius. How ever, when i use xbmc i never actually go into nautilius...

Is there anyway to autodownload subs?
Im pretty new to xbmc... So please be easy with me:)

Thanks!

streaming read-ahead feature

sarbel — Fri, 20 Nov 2009 19:07:54 GMT

Hi

I wonder if there's any video player which could not only play streamed video content from the web but also buffer the data before showing it on the screen. i.e downloading 15 minutes or so before the movie actually starts to play.

This can be helpful for smooth movie playback thru relatively slow internet connections .

Any suggestions?
Thanks
S

YouTube pulls API access from devices

alexpigment — Fri, 20 Nov 2009 18:20:19 GMT

Hey guys, I just read this on Engadget a second ago; "YouTube pulls a Hulu -- yanking API access from Popcorn Hour, other TV-connected devices". Does anyone know if this will also affect the YouTube3 plugin in XBMC? Is there any theoretical workaround, especially considering the new Flash will have hardware decoding for videos?

http://www.engadget.com/2009/11/20/y...pcorn-hour-ot/