Easy wait to paint xbox case.

[ksteiner1]

this is a tutorial on how to paint ur top and other parts of ur xbox without opening it.

warning if u dont follow instructions u can ruin ur xbox.

im not responsible for any damage.

o0k will post later......

[Asteron]

this is a very odd message. most who don't have anything ready to post would postpone the posting until they do. you get props for going against the grain.

-ast

[ksteiner1]

k items needed

1-2 cans of spary paint( u can only have one color if u want to do this without opening it).

ps. i used spray paint that i used long ago for painting my bike, and it worked fine.

you need 1 roll of tape( i used a kind of tape u use for putting on the edges of baseboard when ur painting your house)
buy this at canadian tire if u live in canada or other places.

newspapers

first you need to get the tape out and cover everythign but the
big x cover all ventilation holes i suggest put alot of take on that because if any of the paint goes in ur dead... in the controller ports smush up a piece of newspaper and put it in the port (make sure their tight in) now cover the the dvd thingy where it says xbox just that. just cover everything that u dont want to paint and also cover the bottom of the xbox a bit. after you've covered everything u dont want to paint then u can start
with a light cape of paint then wait for a while do another1 then another1 after everythibg is dried take the tape off and there u go a beautiful xbox

ps cover the jewel too and if u get paint on it u can get soem alchohol and just take a cloth and rub it till it goes off.

i did this all on my own and it worked great for me

again i dont take responsability for a broken xbox

[C-Quel]

is this guy serious?

by the sounds of it i'd get a better finish with nail varnish. stuff rubbing it down with the alcohol i'd probably need to drink that after ruining my xbox with soggy newspaper/take and spary paint?

what a waste of forum space and a load of %$^&£$&^!

[Asteron]

let me summarize this tutorial.

1. put masking tape on the places you don't want to paint.
2. paint it!

[C-Quel]

ahhh now i understand the complexity of this! :)

thanks asteron :)

[ksteiner1]

trust me man it works like a charm. it worked for me it wil work for you just follow the steps.

[saturn_one]

1. put masking tape on the places you don't want to paint.
2. paint it!

i always wannted to paint my xbox, but now that i read this, its too hard and complicated i could never pull it off!

[kingrolo]

i did this all on my own and it worked great for me

bless, he did it without any help from his carers. hats off to the guy. hope he didn't use any sharp sissors. :nuts:

[HarshReality]

way to revive a dead thread guys!


<span style='font-size:17pt;line-height:100%'>it lives!!!!</span>